[ Freshour Manufacturing - Daewoo Puma10 Lathe
[ Program written 5-14-2008 by JP This Program
[ is designed to turn threadded plugs (1.5 OAL)
[ 1 inch of thread under the head using 1.375
[ inch Hex bar. The tool shank stops at start
[ point (2.5 inches) away from chuck for a stop.
% 
O1064 ( 16P THREAD 1.063 PLUGS - 1.5 MAT. )
( * START X -291.485 - START Z -429.255 * )
G20 G90 (INCH, ABSOLUTE)
G92 X-1.500 Z-0.4560 (SET START POINT)
G96 S0400 (CSS 400 FEET PER MINUTE)
G92 S2000 (MAX RPM 2000)
G00 Z0.000 M03 (SPINDLE CCW)
G95 F0.008 M08 (FEED PER R0.008, COOLANT ON)
G00 X3.000 Z3.000
T1111 (TRIANGLE TOOL)
G00 X1.505
G00 Z0.200
G01 Z-1.090 (ROUGH TURN CORNERS) 
G01 X1.750
G00 Z0.200
G00 X1.440
G00 Z0.200 F0.014 (FEED PER R 0.014)
G01 Z-0.995 (Rough 0)
G01 X1.600
G00 Z0.200
G00 X1.380
G00 Z0.200
G01 Z-0.995 (Rough 1) 
G01 X1.600
G00 Z0.200
G00 X1.310
G01 Z-0.995 (ROUGH 2)
G01 X1.600
G00 Z0.200
G00 X1.240
G01 Z-0.995 (ROUGH 3)
G01 X1.600
G00 Z0.200
G00 X1.170
G01 Z-0.995 (ROUGH 4)
G01 X1.600
G00 Z0.200
G00 X1.110
G01 Z-0.995 (ROUGH 5)
G01 X1.600
G00 Z0.200
G00 X1.060
G01 Z-0.995 (ROUGH 6)
G01 X1.600
G00 Z0.200
G00 X0.867
G00 Z0.020
G01 X1.057 Z-0.075 (CHAMFER)
G01 Z-0.863 (FINISH TURN)
G01 X.984 Z-0.900 
G01 Z-0.963
G01 X1.057 Z-1.000
G01 X1.500
G01 Z-1.093
G01 X1.750
G00 Z6.000 M09 (COOLANT OFF)
M01 (OPTIONAL STOP)
T1010 (THREAD TOOL)
G97 S1500 M3 (CSS CANCEL, 1500 RPM)
M08 (COOLANT ON)
G00 X1.150 Z0.220
G76 X0.984 Z-0.940 K511 D200 E.0625 A29
G00 X2.500 M09 (COOLANT OFF)
G00 Z6.000
M01 (OPTIONAL STOP)
T0909 F0.003 (PART OFF TOOL, FEED .003)
G96 S0400 (CSS 400 FEET PER MINUTE)
G92 S1500 M08 (MAX RPM 1500, COOLANT ON)
G00 X1.760
G00 Z-1.500
G01 X-0.050
G00 X1.760 M09(COOLANT OFF)
G00 Z6.000
T1212 (BAR STOP)
G00 X-1.500 Z0.000 (STOP POSITION)
M05 (SPINDLE STOP)
M30 (PROGRAM END - RESET)
%